MX-80 Hydrocarbon Remediator

incl VAT (bulk discounts apply) (bulk discounts apply)

MX-80 Hydrocarbon Remediator is a complex blend of proprietary chemistry and remediation additives, offering rapid reductions of a broad spectrum of organic pollutants, with the combined benefits of the rapid reaction rate of chemistry, combined with the security of long in situ remediation cutting labour transport, and disposal fees

Product Code:

Applications

USES

Soil remediation
Oil & Hydrocarbon spills
Cleaning of intertidal zones
River and waterbody remediation
Odour control
Pesticides
Heavy Metals

BENIFITS

Non-Toxic
Water soluble
Non-flammable
Biodegradable
Enhances plant growth

METHOD

It is always advisable to take soil samples to determine soil type, degree of contamination and depth of contamination
Once the TPH has been determined, additional soil samples dosed with MX-80 at various ratios to be tested at various intervals - 72 hours, 1 week, 2 weeks will indicate the optimum time/cost method
As a rule of thumb, the area should be saturated with a 50/50 ratio can be used as a guide for contaminations lower than 25000ppm. This should achieve sub 1000ppm results in less than 2 weeks. For faster results, a higher dosage rate can be used
Shake or mix the MX-80 especially when the product has been in storage for long periods or when temperatures drop below 5' Celsius
MX-80 can be sprayed, poured, or injected depending on depth of the contaminant and soil type
Ensure correct PPE is used at all times
Where correct PPE is used at all times
Where the contaminant is on or near the surface, the soil can be sprayed at the desired rate, raked, turned manually or mechanically, and sprayed again
Allow 24 hours to react and then lightly water to assist with the silicates freedom of movement in making contact with the pollutant
Repeat the process after 24 hours
Regular sampling as per lab analysis will ensure targets are being achieved
A treatment of "Cyber-bac" bacteria is recommended for pockets of contaminant that may occur underground and are inaccessible for contact with MX-80
In areas of deep contamination and injection is required it is advisable to contact Cyberchem and we will bring our reputable spill clean-up experts to site to advise on the application.

Specifications

CHEMICAL PROPERTIES

Proprietary blend of Silicate and remediation additives

20-40%

Product Specifications Documents

PDI MX-80_0.pdf (744.31 KB)

Precautions

SKIN	Wash with soap and water. Gloves are recommended
EYES	Remove contact lenses. Flush with water or saline for 15min
CAUTION	MX-80 Hydrocarbon Remediator will etch glass

In its concentrated form the product is highly alkaline and can be harmful to aquatic life, and therefore caution should be taken when utilized near waterways.

If used as recommended, the contamination that MX-80 is used to treat being acidic in nature, will counter the high alkalinity, thereby mitigating the risk that MX-80 may pose. However, care must be taken to prevent any spills during the storage and transportation phase.

If a spill should occur, immediately consult registered waste management company and dispose of according to municipal by laws.