Shop | Cyberchem | Chemical Manufacturers

Blu X Biocide

Select Category

Blu X Biocide (ACT-909) is a highly effective liquid biocide which will control growth of micro-organisms in a cooling system across the complete range of organisms - algae, fungi, etc.

Off

METHOD OF USE

Initially, or in fouled systems, feed at the rate of 20 – 120 ppm (400 ml – 1.2lt) per each 10,000lt of system water volume
Continue this dosage level until control is achieved
Then, feed at the rate of 25 – 75 ppm (250ml – 750ml) per 10,000lt of system water volume on a regular basis (once or twice a week) as needed

There are currently no reviews for this product.

CHEMICAL PROPERTIES

pH	3-5
Appearance	Light Blue viscous liquid
Specific Gravity	1.015 - 1.025 gm/cc

Product Specifications Documents

Blu X Biocide PDI.pdf (151.88 KB)

SAFETY PRECAUTIONS

Eyes	Immediately flush eyes with lots of running later for 30 minutes, lifting the upper and lower eyelids occasionally. Get immediate medical attention
Ingestion	Do not induce vomiting. If conscious, give lots of water. Get immediate medical attention. Do not give anything by mouth to an unconscious or convulsing person
Inhalation	Remove to fresh air. Give artificial respiration if not breathing. Get immediate medical attention
Skin	Immediately wash skin with lots of soap and water Remove contaminated clothing and shoes. Wash before re-use. Get medical attention if irritation persists after washing

Alu Brite RTU

Select Category

Aerosol Products

A RTU aluminium cleanser and brightener. Contains special blends of acids to emulsify dirt, oil, grease, and oxides while brightening aluminium surfaces.

Off

USES

Recommended for Aluminium. Do not use on other surfaces. If splashed on glass, rinse immediately to avoid etching.

METHOD OF USE

For aluminium and stainless-steel trucks and trailers: Use neat or slightly diluted. Working in hot, direct sun may cause streaking, therefore it is essential to wet down sides of trailer with water to cool surface before application of cleaning solution. Always use a plastic or stainless-steel sprayer or bucket. Apply by spraying or with a soft acid-resistant brush. Pressure washers may be used provided they are acid resistant. Always clean from the bottom up to avoid streaking. Allow solution to stay on surface for 5 minutes then flush thoroughly with water. NB. Do not allow solution to dry on cleaning surface.

There are currently no reviews for this product.

CHEMICAL PROPERTIES

ph	0.2 - 0.6
SG	1.005 - 1.015
Rinseability	Excellent

Product Specifications Documents

PDI Alu Brite.pdf (277.58 KB)

SAFETY PRECAUTIONS

Eyes	Remove contact lenses and flush thoroughly with water
Ingestion	Do not induce vomiting. If conscious give give 3 or 4 glasses of milk or mild solution of bicarbonate of soda. Get medical attention
Skin	Wash with soap and water

Recommended for aluminium and stainless steel. Do not use on other surfaces.

If splashed on glass, rinse immediately to avoid etching.

Avoid contact with eyes, skin and clothing.

When not in use keep container closed and out of reach of children.

Keep container in a cool place, temperature not to exceed more than 25 degrees celcius.

Always wear rubber gloves, chemical goggles and protective clothing.

Alu Brite

Select Category

Aerosol Products

Concentrated aluminium cleanser and brightener. Contains special blends of acids to emulsify dirt, oil, grease, and oxides while brightening aluminium surfaces.

Off

USES

Recommended for Aluminium. Do not use on other surfaces. If splashed on glass, rinse immediately to avoid etching.

METHOD OF USE

For aluminium and stainless-steel trucks and trailers: Use a solution of one part product diluted with 20 to 30 parts water. Working in hot, direct sun may cause streaking, therefore it is essential to wet down sides of trailer with water to cool surface before application of cleaning solution. Always use a plastic or stainless-steel sprayer or bucket. Apply by spraying or with a soft acid-resistant brush. Pressure washers may be used provided they are acid resistant. Always clean from the bottom up to avoid streaking. Allow solution to stay on surface for 5 minutes then flush thoroughly with water. NB. Do not allow solution to dry on cleaning surface.

For stainless steel equipment: Dilute one part product up to 20 parts water to remove rust spots and other marks from stainless steel tanks, urinals etc.

There are currently no reviews for this product.

CHEMICAL PROPERTIES

ph	0.2 - 0.6
SG	1.005 - 1.015
Rinseability	Excellent

Product Specifications Documents

PDI Alu Brite.pdf (277.58 KB)

SAFETY PRECAUTIONS

Eyes	Remove contact lenses and flush thoroughly with water
Ingestion	Do not induce vomiting. If conscious give give 3 or 4 glasses of milk or mild solution of bicarbonate of soda. Get medical attention
Skin	Wash with soap and water

Recommended for aluminium and stainless steel. Do not use on other surfaces.

If splashed on glass, rinse immediately to avoid etching.

Avoid contact with eyes, skin and clothing.

When not in use keep container closed and out of reach of children.

Keep container in a cool place, temperature not to exceed more than 25 degrees celcius.

Always wear rubber gloves, chemical goggles and protective clothing.

All-In-One

From incl VAT (bulk discounts apply) (bulk discounts apply)

All-In-One is a master penetrant, corrosion retardant, lubricant and water repellent.

View Product

Air-San HVAC

From incl VAT (bulk discounts apply) (bulk discounts apply)

A synergistic blend of novel fragrances for odour control. A hygienic air deodorizing spray specifically designed for the HVAC air condition industry, hospitals, sick rooms, mortuaries, hotel foyers...

View Product

Adhesive Label Remover

Select Category

Industrial Products

A solvent blend for fast and efficient removal of paper labels and adhesive residue.

Off

For the fast and efficient removal of paper labels and adhesive residue.

Wipe/Spray the label ensuring the label is soaked through to allow the product to penetrate and attack the glue residue. Leave for a few minutes before removing label by peeling or scraping. Wipe the surface clean of any remaining residue with a soaked cloth.

There are currently no reviews for this product.

CHEMICAL PROPERTIES

Blend of quick drying solvents
Specific Gravity	0.865
Flash Point	54°C

SAFETY PRECAUTIONS

Use with adequate ventilation. Breathing of excess vapours can cause dizziness and nausea.

Best to use protective gloves when using. Avoid contact with skin, eyes and mouth. Do not take internally.

Store container closed, in a cool, dry place when not in use. Contents of drum may expand in hot weather, so vent container to relieve pressure.

Solvents in this product may damage certain plastics and painted surfaces.

Pre-test product in an inconspicuous area prior to use.

All-In-One

Air-San HVAC

Need Assistance?

Stay Informed